How to open Flow valves in Abiotic Factor

     So, you’ve made it to the Hydroplant, but now you're staring at a set of locked flow valves, unsure what to do next. Isaiah mentioned they’re across the reservoir, but where exactly? And why won’t the buttons work? This guide will walk you through the exact locations of the flow valve controls, what you need to do beforehand, and how to finally unlock them so you can flood the spillway and advance to the next stage of your adventure.

 

 

 

Find the flow valve controls

 

     Before you can open the flow valves, you need to find the control stations. There are four flow valve control points, and they are scattered across different locations in the Hydroplant facility. The main ones to focus on are:

 

     1. The big tower across the reservoir – This is the primary control station.

 

     2. Neutrino Emitter Tower – Contains a button required for valve activation.

 

     3. Electrical Station – Another key location for resetting valve systems.

 

     4. The final control point inside the Hydroplant facility – This button completes the sequence.

 

     You will need to visit each of these locations and activate their respective buttons to fully unlock the flow valves.

 

 

Restore power before activating the valves

 

     Before the flow valves can be adjusted, the power system must be fully restored. If you haven't done this yet, go back to the power control station near Isaiah and manually reset it. If the turbines in the electrical station are not spinning, then power hasn’t been fully restored, and the flow valves will remain locked.

 

 

     After ensuring power is back online, check the H-building control room. There are four monitors here, each representing different steps of the process. If any of them are still inactive, you may need to revisit certain steps.

 

 

Activate the Flow Valve controls

 

     Once power is restored, it’s time to activate the flow valves. Each valve control requires you to press a button at its location. Be sure to press all four buttons to complete the activation.

 

     1. First, you need to reach the tower across the reservoir. If you have a Jetpack, you can try jumping over the water. If not, be prepared to dive deep to find an entrance in the water labyrinth.

 

 

     2. Inside, you will find a control console with a button - press it.

 

     

 

     3. Head to the Electrical Station. Find the button on the console inside and press it.

 

     4. Return to the Hydroplant Facility. The last control point should now be active. Press the button to finalize the process.

 

     After pressing all four buttons, return to the H-building control room and check the monitors. If all are green, the flow valves are now fully operational.

 

 

Check for bugs and common Issues

 

     If you’ve pressed all the buttons but the system isn’t responding, you might be dealing with a bug. Players have reported issues with objectives failing to update correctly. Here’s how to troubleshoot:

 

     1. Repeat conversations with key NPCs. Some players have fixed the issue by selecting the second dialogue option with Dr. Tang and letting the entire conversation play out.

 

     2. Check if all turbines are spinning in the Electrical Station. If they’re not, power hasn’t been restored properly.

 

     3. Destroy electronic cabinets with a golden glow nearby. Some players found that breaking these objects allowed the button to activate.

 

     4. Revisit the control points and press the buttons again. Sometimes they don’t register properly.

 

     5. Restart your game session. A fresh reload may fix the progression issue.

 

     If none of these solutions work, you might need to file a bug report and wait for a fix.

 

 

Final step

 

     Once everything is set, return to the H-building control room and check the monitors. If all four lights are green, the flow valves are fully activated, and the system is ready for use. You can now proceed to open the spillway floodgates, advancing further in the game.

 

     Opening the flow valves in Abiotic Factor might seem like a frustrating puzzle, but once you know the locations and the required steps, it becomes a straightforward process. Just make sure power is restored, press all four control buttons, and check the monitors in the H-building for confirmation. If you run into bugs, try repeating conversations or restarting your session. Now that the flow valves are open, you’re one step closer to uncovering the mysteries hidden within the Hydroplant.